• Durite 0-852-04 - 12/24 Volt Solid State Battery Guard - 40 Amp Version

12/24 Volt Solid State Battery Guard Monitors - 40 Amp Version.

12/24 volt, 40 amp version, with provision for external on/off switch, solid state battery guard, monitors the battery voltage and disconnect load when the battery voltage reaches a pre-determined level. The voltage level at which the device operates to disconnect or reconnect the load to the battery can be set to one of 10 different programmes by the installer using a simple bridge and integral LED indicator. The unit also has an alarm circuit to power an audio and/or visual indicator to warn of imminent disconnect, allowing the operator 50 secs to rectify the situation before disconnecting. A 10 second delay is built in prior to an alarm, to prevent spurious warnings. The alarm circuit is limited to 500mA maximum, if a higher current is required a relay with a diode must be used, 0-727-14 for 12v and 0-727-26 for 24v. Quiescent current is below 10mA for all versions. Appropriate terminals and insulating covers are provided with each unit. Protected to IP65. ECE and CE approved.

Product details:

  • Part number: 0-852-04
  • Protected: IP65
  • Dimensions: Length 76mm x width 78mm x height 33mm
  • Approvals: ECE and CE approved
  • Quantity: Box 1

Write a review

Please login or register to review

Durite 0-852-04 - 12/24 Volt Solid State Battery Guard - 40 Amp Version

  • Brands Durite
  • Product Code: 0-852-04
  • Availability: 46
  • £74.59

  • Ex Tax: £62.16

Tags: 085204